Conceptronic CM3PVRL - Connecting your CM3 PVRL; Composite Connection; SCART Connection

ENGLISH
29
6. Connecting your CM3PVRL
Connecting the Video Cable(s)
You can connect the unit in 4 different ways to your TV:
- Composite
- SCART (by using the Composite cable & Scart Adapter)
- S-Video **
- Component **
** When using S-Video or Component, only the video signal is send to your TV.
For the audio signal, use the Audio RCA Jacks on the Composite cable (Red, White), or the Coaxial
SPDIF cable.
Composite:
• Connect the Composite cable (Yellow, Red, and White) to the corresponding AV Output jacks on the
unit.
• Connect the other side of the Composite cable (Yellow, Red, and White) to your TV.
SCART:
• Connect the Composite cable (Yellow, Red, and White) to the corresponding AV output jacks on the
unit.
• Connect the other side of the Composite cable (Yellow, Red, and White) to the jacks on the SCART
Adapter.
• Set the switch of the SCART Adapter to “Input”.
• Connect the SCART Adapter to the SCART Input of your TV.