Copyright
®
2009 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 3
Conceptronic CM3S Firmware Upgrade Instructions
for firmware version 1.58D
A. Upgrade information
The Conceptronic CM3S is equipped with an upgradeable firmware chip. This function makes it possible to
improve the device and to add new features.
Note: The firmware upgrade procedure is at your own risk. Even though a firmware upgrade can
improve the device and add new features, there’s a small possibility of an upgrade failure
which makes the device unusable.
B. Upgrade procedure
1. Copying the firmware files to the CM3S
1.1 If you have downloaded the firmware upgrade from www.conceptronic.net, you have a ZIP file
containing a folder named ‘Firmware’ and three documentation files.
1.2 Connect the CM3S to your computer with the USB cable.
1.3 Copy the ‘Firmware’ folder including all its content to the hard disk of the CM3S.
1.4 Remove the CM3S from your computer with the ‘Safely remove hardware’ option.
1.5 Disconnect the USB cable of the CM3S and turn it off with the switch on the back side.
To Next Page
Need help?
General
