English
Conceptronic HDE02B
1.
Package contents
2.5” Hard Disk Box
USB 3.1 Type-C cable
Screws and screwdriver
Multi language quick installation guide
2.
Installation & usage
Con n ect the 2.5” hard disk box to your co mputer
Connect the USB cable to the 2.5” hard disk box and to a free USB port on your
computer.
The computer will automatically recognize and install the 2.5” hard disk box. No
driver installation is required.
NOTE:
To enjoy USB 3.1 super speed up to 10Gbps, your computer must be equipped with
built-in USB 3.1 ports, or a USB 3.0 host PCI-e card. (If the USB cable is connected to
USB2.0, the transfer speed will down to 480Mbps.)
Dis con nect the 2.5” hard disk box from yo ur computer
The 2.5” hard disk box must be removed safely before you disconnect it from your
computer, in order to prevent data loss.
Double click on the “Safely Remove Hardware” icon in your system tray.
The “Safely Remove Hardware” window will be shown.
Click on the connected 2.5” hard disk box (often listed as “USB Mass Storage
Device”) and click the “Stop” button.
Confirm the disconnection by clicking “OK”.
The 2.5” hard disk box is now safely removed from your computer. You can now
disconnect the 2.5” hard disk box.
To Next Page
Loading...
