Need help?Do you have a question about the CONCORD CNK8845P-V2 and is the answer not in the manual?
Connect one end of A to a camera and the other to a LAN Camera input 9. Use weatherproof covers for outdoor camera connections.
Connect a monitor or HDTV to port 5 using the HDMI cable, or to port 4 using a VGA cable.
Connect the supplied USB mouse to either USB port 7.
Connect the power supply unit to the power input 1 and switch on the power switch 2.
Set a password of at least five characters, mixing numbers and letters, for initial NVR setup.
General| Recording Resolution | 1080p |
|---|---|
| Hard Drive Capacity | Up to 6TB |
| Channels | 8 |
| Video Compression | H.264 |
| Remote Viewing | Supported |
| Mobile App Support | Yes |
| Motion Detection | Supported |
| Power Supply | DC 12V |
| Video Input | 8 Channel BNC |
| Video Output | 1 HDMI, 1 VGA |
| Hard Drive Support | 1 |
| Audio Input | 4CH RCA |
| Audio Output | 1 Channel RCA |
| Network Interface | RJ-45 Ethernet (10/100M) |
| USB Interface | 2 |
| Operating Temperature | -10°C to +55°C |
To Next Page
