Need help?Do you have a question about the CONCORD CNK8244WPB-A and is the answer not in the manual?
Guidelines to prevent personal injuries and equipment damage.
Setting and managing the administrator password for system security.
Guides through initial system configuration for quick NVR setup.
Setting up IP address, subnet mask, gateway, and ports for network connectivity.
Setting up wireless cameras, live view display, and managing camera pairing.
Configuring motion detection alarms, buzzer, recording, and notifications.
Configuring channel recording enable, stream mode, and pre-record settings.
Configuring DHCP, IP address, subnet mask, gateway, and DNS settings.
Checking and formatting the internal HDD, and managing overwrite settings.
Viewing system logs, loading defaults, upgrading firmware, and managing parameters.
Searching and playing back recorded videos and snapshots from the NVR.
Viewing and backing up recorded events with channel, time, and type details.
Steps to download and install the necessary plugin for Web Client access.
Searching and playing recorded files stored on the NVR HDD remotely.
Instructions for remote access using mobile devices via the Concord Security app.
Solutions for common problems like HDD detection, password issues, and video signal.
Guidelines to prevent personal injuries and equipment damage.
Setting and managing the administrator password for system security.
Guides through initial system configuration for quick NVR setup.
Setting up IP address, subnet mask, gateway, and ports for network connectivity.
Setting up wireless cameras, live view display, and managing camera pairing.
Configuring motion detection alarms, buzzer, recording, and notifications.
Configuring channel recording enable, stream mode, and pre-record settings.
Configuring DHCP, IP address, subnet mask, gateway, and DNS settings.
Checking and formatting the internal HDD, and managing overwrite settings.
Viewing system logs, loading defaults, upgrading firmware, and managing parameters.
Searching and playing back recorded videos and snapshots from the NVR.
Viewing and backing up recorded events with channel, time, and type details.
Steps to download and install the necessary plugin for Web Client access.
Searching and playing recorded files stored on the NVR HDD remotely.
Instructions for remote access using mobile devices via the Concord Security app.
Solutions for common problems like HDD detection, password issues, and video signal.
General| Hard Drive Support | 1 SATA HDD |
|---|---|
| Hard Drive Capacity | Up to 6TB |
| Operating System | Embedded Linux |
| Power Supply | DC12V/2A |
| Compression | H.264 |
| Audio Input | 4 channels |
| Audio Output | 1 channel |
| Network Interface | RJ45 10/100Mbps |
| USB Interface | 2 USB 2.0 ports |
To Next Page
