Need help?Do you have a question about the Condair Nortec RS Series and is the answer not in the manual?
Details manual scope, limitations, and cross-references.
Outlines general safety rules, personnel qualifications, and intended use.
Illustrates product components and system integration.
Explains the operational principles of the steam humidifier.
Steps for first-time and post-interruption commissioning.
Identifies touchscreen, status LED, and unit switch.
Weekly inspections, remote indication, and steam cylinder draining.
Procedure for safely shutting down the unit for maintenance.
Overview of the main screen layout and its fields.
Explains status indicators and maintenance/fault messages.
Describes navigation, support, and system information access.
Configuration for network protocols (Modbus, BACnet) and remote enable.
Overview of Features, Water Management, and submenus.
Settings for source, control mode, and humidity setpoints.
Configuration for date, time, language, units, and network protocols.
Safety, qualifications, schedules for small and extended maintenance.
Overview of tasks and procedures for component removal/installation.
Safety, qualifications, and how faults are displayed.
Table of malfunctions and procedures for saving logs.
Procedures for clearing errors and replacing fuses/battery.
Technical performance data for different models and voltages.
Specifications, parameters, and physical details of the unit.
Details the manufacturer's warranty period and limitations.
General| Model | RS Series |
|---|---|
| Type | Steam humidifier |
| Humidification Capacity | 0.5 to 60 kg/hr |
| Power Supply | 50/60 Hz |
| Steam Output Control | Proportional or On/Off |
| Control | Integrated |
| Water Supply | Potable water |
| Installation | Wall-mounted |
| Material | Stainless steel |
| Applications | Commercial and industrial buildings |
| Dimensions | Varies by model |
| Weight | Varies by model |
To Next Page
