Need help?Do you have a question about the Condair RS series and is the answer not in the manual?
Explains the scope, limitations, and content of this operation manual for users.
Defines the required training and authorization for personnel operating the unit.
Details specific dangers including electric shock, scalding, and burns.
Illustrates and lists the physical components of the Condair RS humidifier.
Explains the working principle of steam generation and water level regulation.
Shows typical system setups for duct and direct room humidification.
Step-by-step guide for initial installation and setup.
Details the touchscreen display, status LEDs, and unit switch.
Safe procedures for shutting down and preparing the unit for maintenance.
Description of the main screen, status fields, and indications.
How to navigate menus, use buttons, and adjust settings.
Explains settings for water management, features, and control parameters.
Details recommended service schedules and how they are indicated.
Lists specific maintenance actions for small and extended services.
Instructions for cleaning scale collector tank, steam cylinder, and heating elements.
Procedure for resetting service indicators after maintenance is completed.
Explains how the unit indicates malfunctions via display and LEDs.
Lists common malfunctions, their causes, and recommended solutions.
Step-by-step guide for replacing internal fuses and the backup battery.
Guidelines for environmentally responsible disposal of the unit components.
Details of steam output capacity, power consumption, and voltage ratings.
Lists control accuracy, ambient conditions, water supply requirements, and protection class.
Explains the scope, limitations, and content of this operation manual for users.
Defines the required training and authorization for personnel operating the unit.
Details specific dangers including electric shock, scalding, and burns.
Illustrates and lists the physical components of the Condair RS humidifier.
Explains the working principle of steam generation and water level regulation.
Shows typical system setups for duct and direct room humidification.
Step-by-step guide for initial installation and setup.
Details the touchscreen display, status LEDs, and unit switch.
Safe procedures for shutting down and preparing the unit for maintenance.
Description of the main screen, status fields, and indications.
How to navigate menus, use buttons, and adjust settings.
Explains settings for water management, features, and control parameters.
Details recommended service schedules and how they are indicated.
Lists specific maintenance actions for small and extended services.
Instructions for cleaning scale collector tank, steam cylinder, and heating elements.
Procedure for resetting service indicators after maintenance is completed.
Explains how the unit indicates malfunctions via display and LEDs.
Lists common malfunctions, their causes, and recommended solutions.
Step-by-step guide for replacing internal fuses and the backup battery.
Guidelines for environmentally responsible disposal of the unit components.
Details of steam output capacity, power consumption, and voltage ratings.
Lists control accuracy, ambient conditions, water supply requirements, and protection class.
General| Humidity Sensor | Optional |
|---|---|
| Installation | Wall-mounted |
| Ambient Temperature | 5 to 40 °C |
| Communication Interface | Modbus RTU |
| Operating Pressure | 1 to 10 bar |
To Next Page
