Need help?Do you have a question about the Condair RM2 and is the answer not in the manual?
Outlines general safety requirements and specifies qualifications for personnel working with the unit.
Defines the intended application of the humidifier and prohibits unauthorized modifications.
Details dangers from electricity, scalding, and burning, with corresponding prevention measures.
Step-by-step guide to configure humidity control using an external controller.
Steps for configuring humidity control with an internal sensor and controller.
Setting the controller type, sensor signal, and unit size for internal control.
Safety and qualification requirements before performing maintenance tasks.
Details maintenance intervals based on water quality and filter cartridge replacement schedules.
Lists specific components and the required maintenance work for each.
General instructions and specific steps for removing and installing major components like the steam tank.
Detailed, step-by-step instructions for replacing the optional filter cartridge.
Procedure to reset unit maintenance and filter cartridge replacement counters after service.
Safety and qualification requirements before starting troubleshooting.
Explains how faults and warnings are indicated via LEDs and the warning triangle on the display.
Comprehensive list of malfunctions, their possible causes, and recommended remedies.
Outlines general safety requirements and specifies qualifications for personnel working with the unit.
Defines the intended application of the humidifier and prohibits unauthorized modifications.
Details dangers from electricity, scalding, and burning, with corresponding prevention measures.
Step-by-step guide to configure humidity control using an external controller.
Steps for configuring humidity control with an internal sensor and controller.
Setting the controller type, sensor signal, and unit size for internal control.
Safety and qualification requirements before performing maintenance tasks.
Details maintenance intervals based on water quality and filter cartridge replacement schedules.
Lists specific components and the required maintenance work for each.
General instructions and specific steps for removing and installing major components like the steam tank.
Detailed, step-by-step instructions for replacing the optional filter cartridge.
Procedure to reset unit maintenance and filter cartridge replacement counters after service.
Safety and qualification requirements before starting troubleshooting.
Explains how faults and warnings are indicated via LEDs and the warning triangle on the display.
Comprehensive list of malfunctions, their possible causes, and recommended remedies.
General| Max. Operating Pressure | 6 bar |
|---|---|
| Type | Steam humidifier |
| Power Supply | 230 V / 50 Hz |
| Airflow | N/A (Steam Humidifier - no forced airflow) |
| Water Supply | Mains water |
| Installation | Wall-mounted |
| Material | Steel and plastic |
| Water Connection | 1/2" BSP |
To Next Page
