Condair RM2 - Display and Operating Elements

15Operation
4.2 Display and operating elements
External electrical isolator for voltage supply (not includ ed in the
delivery, must be install ed in the mains supply line)
Display
Status LED
– green: Condair RM is humidifying
– green pulsing: Condair RM is in standby operation
– yellow: Warning present or maintenance due
– red: Fault present
Unit switch
Fig. 4: Display and operating elements
DANGER!
Risk of electric shock!
After switching off the unit switch, there is still live voltage inside the control compartment of the Condair
RM.
Therefore,beforeopeningtheunitthesteamhumidiermustbealwaysseparatedfrom
the mains supply/supplies via the electrical isolator(s).