Copyright © 2022, Condor Instruments Ltda. 6
Professor Tulio Street Ascarelli, 290 - Vila Madalena, São Paulo, SP - Cep:05449-020
The ActDock Lumus (common name: USB/Bluetooth adapter) consists of five
parts, the Lid, The Base, the Rear Cover, the PCB and the USB cable. This
accessory is intended to adapt the USB pins in ActLumus to a normal USB
connector as well as enable the Bluetooth connection of the ActLumus to the
computer.
Maintenance and Cleaning
• Clean with damp cloth and mild soap.
Notes:
• Avoid contact with gasoline, benzene, thinner or acetone and, in case of
contact with one of these substances, clean with damp cloth and neutral
soap as soon as possible.
• Do not use abrasive or highly alkaline products (e.g., saponaceous or
ammonia-based cleaning products).
• Do not use Isopropanol or Butyl cellulose on any of the dock surfaces.