STEP 4:
INSTALLING ROLLGUARD
®
Tools needed: rubber mallet
Parts needed: 1- ROLLGUARD
®
1- Ladder tread
#1: With the ladder laying on
it’s side, slide the ROLLGUARD
®
into track, grab handle first.
#2-6: Slide ROLLGUARD
®
around to other side of ladder.
#4 #5 #6
#7-8: Install bottom tread. IMPORTANT: this bottom tread
MUST be installed to block the track, ROLLGUARD
®
must
not come in contact with pool liner.
NOTE: Bottom tread will not be flush with ladder rail. Tread
will extend past the bottom of ladder rail.
To Next Page
Loading...
