Confer Plastics ROLLGUARD 7200 - User Manual

MODEL #7200
“ROLLGUARD
®
” A-FRAME LADDER
LADDER MUST BE ATTACHED TO POOL FRAME.
DO NOT USE WITH INFLATABLE POOLS
ASSEMBLY AND INSTALLATION MANUAL
Proudly Made in U.S.A. by
SAVE THESE INSTRUCTIONS
DEALER/INSTALLER: GIVE TO HOMEOWNER
US Patent Numbers
8,191,682
8,191,681
8,202,018

Summary

Assembly and Installation Steps

Step 1: Inside Ladder Assembly

Assemble the inside ladder by attaching treads to the left and right rails.

Step 2: Outside Ladder Assembly

Assemble the outside ladder by attaching treads to the left and right rails.

Step 3: Handrails and Deck Assembly

Connect the deck and handrails to the assembled ladder sections using hardware.

Step 4: Installing Rollguard

Slide the ROLLGUARD® into its track and install the bottom tread.

Step 5: Placing Ladder in Pool

Position ladder in pool, fill rails with water, and secure stabilizer rails.

Safety, Maintenance, and Warranty

Safety Rules and Important Information

Essential safety guidelines, warnings, and usage precautions for the ladder.

Maintenance and Winterizing

Procedures for upkeep, padlock care, and preparing the ladder for off-season.

Five Year Warranty

Details of the manufacturer's five-year warranty on workmanship and defects.

Confer Plastics ROLLGUARD 7200 Specifications

General

Brand	Confer Plastics
Model	ROLLGUARD 7200
Category	Lighting Equipment
Language	English