Description of your M730
5
Green key: this is used
- when the set is idle or in communication, to call back the last
number dialed (LNR function) or to access the LNR log,
- when consulting the directories and logs, to call the displayed
number.
Red key: this is used
- to disconnect ringing during an incoming call,
- during a communication, to end the call,
- during programming, to cancel a setting or end a programming
sequence,
- when the set is idle, to lock/unlock the set (hold down the key).
Directory key: used to activate the directory function when the
set is idle or in communication,
- to call a personal abbreviated number,
- to consult and make calls from the directories and the incoming calls
log.
Programming key: this is used to access
- the programming (numbers and functions),
- the settings for the set (ring and contrast),
- the customization of the set (directories management).
Loudspeaker key: during a call, this key is used to enable and to
disable the loudspeaker.
The associated lamp illuminates to remind you that the feature has
been enabled.
Mute key: during a call, this key lets you to cut-off the handset
microphone and talk without your correspondent being able to
hear you.
The associated lamp illuminates to remind you that the feature has
been enabled.
R key (Flashing): during a call, this key is used to access dialing
(to call a second correspondent, for instance).
Voice mail direct access key: when the set is idle, this key is used
to call your voice mailbox.
Navigator: is made up of four direction keys and one central key.
- The or keys are used to display a selection or a record.
- The or keys are used to display additional information
about the selection or the record or to carry out a setting.
- The key is used to confirm a choice, a setting or an entry.
The key is used to display the current status of the set when idle.
To Next Page
Loading...
