Description of your M730
3
Handset cord connector
Line cord connector
Connections
Not available option
*Accessory for the
M730
The M730 is designed to support a kit for wall-mounted position, available in option. Consult
your system operator.
Caution – Do not install the equipment in a damp room or near a water outlet. The equipment
must be used at a temperature between 5°C and 45°C.
Telephone connection – This equipment can not be connected to the public network.
This equipment is designed to be installed with a private switching system of M6500 IP PBX
and Succession 6500 ranges.
The voltage on this network is classed TNV1 (Telephone Network Voltage) according to
standard EN 60-950.
CE marking – This certifies the conformity of the equipment with the
regulations which apply in accordance with the directive R&TTE 1999/5/EC.
Maintenance – Use a cloth which has been dampened in slightly soapy water then wipe with
a dry cloth. Your equipment will retain its new appearance if you do not use any solvents or
household cleaning products.
Recommendations and safety
Line cord groove for
desktop position
To Next Page
Loading...
