Connexity M730 - Receiving a Call; Ending the Call

Calls
6
* Depending on the features provided by your system operator
R + Number
R
+ 10
R
+ 2
R
+ 1
R
+ 3
Replace the handset
Number
9
External acces code (0 or ) + Number
+
(+ )
+
R + 5
When the called correspondent hangs up,
your extension rings
Calling
Calling an internal correspondent
the attendant
an external correspondent
using a programmed key
the last number dialed
Consulting the LNR log and calling
When the correspondent answers,
lift the handset to hold the conversation.
Enabling the automatic redial function
(If an internal correspondent is busy or doesn't answer)
Managing simultaneous calls
During a call:
Calling a second correspondent
Answering a second call (you hear a beep)
If the multikey function is programmed
Switching from one correspondent to the other
Releasing one correspondent
Setting-up a conference call
Leaving the conference call
Pick up the handset
01
02
+ Number
00
R
+
Number
+
replace the handset
Receiving a call
Answering a call
Intercepting a call
sent to a supervised set
a set in your group*
a set in another group
during the general ringing
Then, lift the handset to hold the conversation.
During a call:
Enabling/ disabling the loudspeaker
the mute function
Transferring a call to another set
Replace the handset
Ending the call
or
or
or
or
or
or
or
or
or
M. Martin
Superv.
Superv.