connexx CX50A20ETV - User Manual

Questions and Answers

C
carla29Aug 13, 2025
What to do if connexx CX50A20ETV has poor picture or no picture?
- J
  jasmineshafferAug 13, 2025
  If your Connexx LED TV shows poor or no picture, try the following: * Tune to another TV channel. * Make sure channels are set into memory. * Perform Auto Scan (see channel menu). * Check the antenna or Cable TV connections and adjust the antenna. * Check for sources of possible interference. * Check the picture control adjustments. This may be happening because the Station or Cable TV is experiencing problems.
S
Stanley RayAug 16, 2025
Why connexx CX50A20ETV LED TV has normal picture but no sound?
- M
  Michael MartinezAug 16, 2025
  If your Connexx LED TV has a normal picture but no sound, check the volume settings and ensure the sound isn't muted by pressing the MUTE button. Try switching to another TV channel and verify the audio cable connections to resolve the issue.
D
dpriceAug 20, 2025
What to do if connexx LED TV remote control does not work?
- T
  Tracy BarreraAug 20, 2025
  If the remote control for your Connexx LED TV isn't working, ensure it's within range without obstructions. Also, check the batteries in the remote.
C
Charles BairdAug 25, 2025
Why connexx CX50A20ETV LED TV has poor sound or no sound?
- A
  Andrea MartinezAug 25, 2025
  If your Connexx LED TV has poor or no sound, try tuning to another TV channel. Check your sound adjustments (Volume or Mute) and look for sources of possible interference. This issue may arise if the Station or Cable TV is experiencing problems.
C
Christopher Garcia MDAug 27, 2025
How to fix poor TV reception on connexx CX50A20ETV?
- L
  Larry DennisAug 28, 2025
  To improve poor TV reception on your Connexx LED TV: * Adjust the antenna position for a stronger signal. * Check the antenna connection to ensure it's tight. * Verify power is supplied to the antenna distribution box (RV). * Ensure the internal RV coax jump cable is connected to the correct port.
T
Trevor JimenezAug 31, 2025
How to fix poor cable/satellite TV reception on connexx CX50A20ETV?
- T
  Tonya HudsonSep 1, 2025
  To fix poor Cable / Satellite TV reception on your Connexx LED TV: * Check that the incoming cable is correctly connected to the RV. * Ensure the cable splitter box has power (RV). * Make sure the internal RV coax jump cable is connected to the correct port. * Check that the dish has no obstructions.
J
Joshua WallaceSep 4, 2025
What to do if connexx CX50A20ETV LED TV does not operate?
- R
  Rebecca BowersSep 4, 2025
  If your Connexx LED TV isn't operating, ensure the power cord is plugged in and try another AC outlet. You can also try unplugging the unit for an hour, then plugging it back in.
A
Angel CampbellSep 8, 2025
Why connexx LED TV AV input plays black and white?
- J
  Jacob JacksonSep 8, 2025
  If your Connexx LED TV AV input plays in black and white, check the RCA connections on the back of the TV and from the source to ensure they are correctly connected, paying special attention to the yellow connection to ensure it is in the correct port.

Summary

Important Safety Instructions

Setup Procedures

Connecting the TV Stand

Instructions on how to securely attach the TV stand to the television base.

Installing Remote Batteries

Guidance on inserting the correct batteries into the remote control.

Wall Mounting Guide

Navigating the Main Menu

Setup Wizard Guide

Selecting Input Sources

Setup Menu Operations

Picture Settings Menu

Sound Settings Menu

Channel Management Menu

Bluetooth Connectivity

FM Radio Operation

Media Playback Guide

Troubleshooting Common Issues

Customer Support and Warranty

Product Warranty Details

Information regarding the limited 1-year warranty coverage and terms for the product.

How to Obtain Service

connexx CX50A20ETV Specifications

General

Screen Size	50 inches
Display Technology	LED
Refresh Rate	60 Hz
Smart TV	Yes
Operating System	Android TV
HDMI Ports	3
USB Ports	2
Built-in Wi-Fi	Yes
Bluetooth	Yes
Resolution	4K UHD (3840 x 2160)