Do you have a question about the Conrad-Johnson ET3 and is the answer not in the manual?
gain | 25 dB |
---|---|
maximum output | 20 Vrms |
bandpass | 2Hz to more than 100kHz |
high gain | 54 dB |
---|---|
low gain | 40 dB |
hum and noise | 80 dB below 10 mV input |
fuse F1 for 100 or 120V | 3AG type 3/4 amp, slow blow |
---|---|
fuse F2 for 100 or 120V | 3AG type 1/2 amp, fast blow |
fuse F3 for 100 or 120V | 5 x 20mm T800 (800 ma slow blow) |
dimensions | 13.125"D x 19"W x 3.315"H |
---|---|
net weight | 13 lb net |
main output impedance | 100 ohms |