48
• Adjust the radio camera to the de-
sired position.
9. Commissioning
a) Connecting the radio camera
☞
Make sure that the plug and socket of the connection cable are not exposed to
humidity. This connector may be used in dry rooms only. This connector must
therefore be installed in such a way that it leads into a dry room (for installation
in outdoor areas or in damp rooms).
• Connect the low voltage plug of the supplied power unit to the power supply (10) on your
radio camera.
• Plug the power unit into a suitable mains socket.
• The radio camera is now ready for use.
To Next Page
Loading...