89
14.3 Automatic Position Transmission
Sometimes, information on the site is required several time quickly in alarm situations (when
following the device). In this case, send the following command:
TEST GPS <Time> <Quantity> #1513
or
TEST GPSMAP <Time> <Quantity> #1513
Time = time in minutes between the messages (1-249)
250: 30 seconds
251: 15 seconds
Quantity: Max. number of text messages to be sent (1-1000)
If you want to interrupt before the entire programmed number if text messages from the
“GX107” was reviewed, send the command:
RESET GPS #1513
or
RESET GPSMAP #1513
To Next Page
Loading...