85
c) Configuration
The weather station is operational immediately after it is taken into operation; additional settings of the basic functions
are not necessary (except moon phase, sunset and sunrise indicator, date, clock, min-max display).
But one additional configuration is necessary to use the additional and time-related functions.
• Touch "CFG" to open the configuration menu.
MIN MAX RESET CFG MIN MAX RESET CFG
MIN MAX RESET CFG MIN MAX RESET CFG
MIN MAX RESET CFG
• Touch "NEXT" repeatedly to go to the corresponding next main menu item of the configuration menu. A menu
overview in the Appendix shows how to quickly access individual menus.
XX
XX
X 1. "SENSOR" menu, registering or deleting sensors
See chapter 11 a).
XX
XX
X 2. "TIME/DATE" menu, setting the time and date
This setting is only required if no DCF synchronisation has taken place.
• Select the "TIME/DATE" menu:
NEXT TIME/DATE ENTER NEXT TIME/DATE ENTER
NEXT TIME/DATE ENTER NEXT TIME/DATE ENTER
NEXT TIME/DATE ENTER
• Touch "ENTER" and you will see:
TIME 24H TIME 24H
TIME 24H TIME 24H
TIME 24H
• Touch the "24H" field to select either 12h or 24h time display.
• Touch "TIME" and you will see:
YEAR + 2006 - YEAR + 2006 -
YEAR + 2006 - YEAR + 2006 -
YEAR + 2006 -
• Touch "+" or "-" to set the year.
• Touch "YEAR" and you will see:
MONTH + 07 - MONTH + 07 -
MONTH + 07 - MONTH + 07 -
MONTH + 07 -
• Touch "+" or "-" to set the month.
• Touch "MONTH" and you will see:
DAY + 01 - DAY + 01 -
DAY + 01 - DAY + 01 -
DAY + 01 -
To Next Page
Loading...