Conrad WS888 - UNITS Menu, Setting the Display Units

86
• Touch "+" or "-" to set the day date.
• Touch "DAY" and you will see:
WEEKDAY + MON - WEEKDAY + MON -
WEEKDAY + MON - WEEKDAY + MON -
WEEKDAY + MON -
• Touch "+" or "-" to set the weekday.
• Touch "WEEKDAY" and you will see:
HOUR + 01 - HOUR + 01 -
HOUR + 01 - HOUR + 01 -
HOUR + 01 -
• Touch "+" or "-" to set the hour.
• Touch "HOUR" and you will see:
MINUTE + 01 - MINUTE + 01 -
MINUTE + 01 - MINUTE + 01 -
MINUTE + 01 -
• Touch "+" or "-" to set the minute.
• Wait a few seconds and the display shows the time and date, sunrise and sunset time for the factory setting (52.5/
13.4°, Berlin) and the current moon phase.
XX
XX
X 3. "UNITS" menu, setting the display units
• Select the "UNITS" menu:
NEXT UNITS ENTER NEXT UNITS ENTER
NEXT UNITS ENTER NEXT UNITS ENTER
NEXT UNITS ENTER
• Touch "ENTER" and you will see:
TEMPERATURE DEG C TEMPERATURE DEG C
TEMPERATURE DEG C TEMPERATURE DEG C
TEMPERATURE DEG C
• Touch "DEG" to switch the display between degrees Celsius (C) and degrees Fahrenheit (F).
• Touch "TEMPERATURE" and you will see:
PRESSURE HPA PRESSURE HPA
PRESSURE HPA PRESSURE HPA
PRESSURE HPA
• Touch "HPA" to switch the air pressure display between hPa (HPA), mmHg (MMHG) und inHg (INHG)
• Touch "PRESSURE" and you will see:
RAIN MM RAIN MM
RAIN MM RAIN MM
RAIN MM
• Touch "MM" to switch between rain quantity display in mm (MM), inches (INCH) or l/m² (L/M2).
• Wait a few seconds and the data are displayed in the selected units.