Consew 175 User Manual

OPERATOR'S GUIDE
CON SEW
MODEL 175 MACH IN E
To assure smooth rotation and durability make sure of cleaning
and
oiling the main parts of the machine marked with. the arrows
shown.
icONSEWI
Insert bobbin into bobbin case and pull the trailing threcid into
slot down until it enters grooved eye under tension spring. And
pass thread through thread guide hole.
THREAD GUIDE
HOLE
I
TENSION
SPRING
TENSION ADJUSTING SCREW
From the library of: Superior Sewing Machine & Supply LLC

Consew 175 Specifications

General

Brand	Consew
Model	175
Category	Sewing Machine
Language	English

Summary

Sewing Machine Lubrication

Lubrication Instructions

Guide on cleaning and oiling main machine parts for smooth operation and durability.

Sewing Machine Threading

Threading the Bobbin Case

Steps for inserting bobbin, pulling thread through slot, grooved eye, and thread guide hole.

Threading the Machine

Instructions to lead thread through machine parts numbered 1 to 13 in order.

Machine Adjustments and Controls

Stitch Regulator and Reverse Sewing

Control for adjusting stitch length and enabling reverse sewing.

Presser Foot Pressure

Adjustment guide for presser foot pressure, involving loosening and tightening a nut.

Change of Gear Belt

Procedure for changing the gear belt, including setting the gear set screw.

Zigzag Width Control

Instructions to adjust zigzag width by pushing and turning the zigzag dial.

Timing of Needle and Hook

Steps for adjusting needle and hook timing for correct stitch formation.