Need help?Do you have a question about the Consew 206RB-5 and is the answer not in the manual?
General| Hook | Rotary Hook |
|---|---|
| Stitch Type | Lockstitch |
| Max Stitch Length | 10 mm |
| Reverse | Yes |
| Stitch Length | 10 mm |
| Presser Foot Lift | 9/16" (14 mm) |
| Needle | 135 x 17 |
| Bed Size | 18 7/8" x 7" |
| Type | Industrial |
| Needle System | 135x17 |
| Hook Type | Rotary |
| Presser Foot Lift Alternative | 9/16" (14 mm) by knee, 3/8" (9 mm) by hand |
| Motor | Clutch motor |
| Lubrication | Automatic |
Steps for setting up, breaking in, and operating the machine at correct speeds.
Illustrated guide to all lubrication points and supplementary oiling details.
Instructions for inserting the needle and threading the entire machine.
Instructions on how to remove the sewn material from the machine.
Steps for winding, adjusting, removing, and inserting the bobbin case.
How to set and adjust upper and lower thread tensions for proper stitching.
Adjusting presser foot pressure and stitch length for different materials.
Adjusting presser foot lift and timing the vibrating presser foot.
Adjusting feed dog height, feeder position, needle alignment, and feed fork clearance.
Setting needle bar height and timing the hook with the needle.
Adjusting thread controller spring and bobbin case opener.
Re-setting and adjusting the tension of the safety clutch.
Information on using an optional slotted needle plate for specific materials.
To Next Page
