Need help?Do you have a question about the Consew 230 and is the answer not in the manual?
General| Max Stitch Length | 5 mm |
|---|---|
| Needle System | DBx1 |
| Type | Industrial |
| Stitch Type | Lockstitch |
| Motor Type | Clutch Motor |
| Voltage | 220V |
Apply oil to the take-up lever, needle bar, and other moving parts before operation.
Control oil supply to rotating hook and take-up lever using adjustment valves.
Position the machine in its cutout, ensuring equidistant spacing around the bed.
Instructions for winding thread onto the bobbin, including tension and guide adjustments.
Step-by-step guide for threading the machine, following numbered points from lever to needle.
Method to adjust the presser bar height via a screw on the guide bracket.
Adjust timing and clearance between needle and hook for correct stitch formation.
Regulate thread tension using the serrated nut and understand check spring action.
To Next Page
