Need help?Do you have a question about the Consew 210 and is the answer not in the manual?
General| Stitch Type | Lockstitch |
|---|---|
| Needle System | DBx1 |
| Max Stitch Length | 5 mm |
| Speed | Variable |
| Motor Type | Clutch Motor |
| Voltage | 110V or 220V |
| Operation | Manual |
| Type | Industrial Sewing Machine |
| Table Size | 48 inches x 20 inches |
Identifies the stitch length adjustment control.
Controls the tacking or reverse stitching function.
Shows the current oil level in the machine's reservoir.
Allows for lifting the presser foot using the knee.
Secures the sewing needle in the needle bar.
Adjusts the tension of the upper thread.
Guides the thread during the sewing process.
Controls the pressure exerted by the presser foot.
Allows visual inspection of oil flow.
Describes the all-gear driven, automatic lubrication, and stitch features.
Emphasizes the necessity of proper oiling before operation.
Instructions for fitting the machine head into the table and leveling it.
Details on assembling and adjusting the knee lifter lever and pad.
Explains how oil is circulated for lubrication and cooling.
Guidelines for checking and maintaining the correct oil level.
Procedure for oiling wicks on new or idle machines.
How to adjust the needle valve for oil flow to the hook.
Method to verify the correct amount of oil supplied to the hook.
Instructions for cleaning the oil screen and magnet.
Step-by-step guide for threading the sewing machine.
Instructions on how to take out the bobbin case from the rotary hook.
Detailed steps for placing thread into the bobbin case.
Procedure for inserting the threaded bobbin case into the machine.
Guide for correctly inserting a new sewing needle.
Steps to start sewing, including thread pickup.
How to properly detach the sewn fabric from the machine.
Explains how equal thread tensions create ideal stitching.
Describes stitch appearance when upper tension is excessive.
Describes stitch appearance when lower tension is excessive.
How to adjust the tension nut for the upper thread.
How to adjust the screw on the bobbin case tension spring.
How to adjust the pressure of the presser foot using the regulator screw.
How to use the dial to set the stitch length.
Method for locking the ends of seams using the tacking lever.
Instructions for mounting and preparing the bobbin winder.
Step-by-step process for winding thread onto a bobbin.
How to adjust thread tension for bobbin winding.
Details on assembling the knee lifter lever and pad.
How to set the stops for proper presser foot lifting without strain.
Adjusting when the upper thread tension is released as the presser foot lifts.
Steps to modify the thread tension release timing.
To Next Page
