How
to
1st
the
1gth
of
Stitch
and
to
do
'.-.
.king
The
stitch length is regulated
by
turning dial (D)
at
the front
of the machine (Fig.
11). When number
HO"
on dial appears
uppermost, the machine does not feed.
Turning
dial counterclo-
ckwise will gradually increase the stitch length until the maxi-
mum is reached
\Vhen
number 5
is
on top. As the
stitch
length
is
increasedt
it
can be noticed
that
tacking lever (T) slowly mo.
ves in upward direction.
When shortening
the
stitch length,
it
will be found of
advantage
to depress lever (T) slightly
as
dial (D) is being turned clock*
wise.
To
do tacking for
the
purpose of locking
the
ends of
seams, rapidly depress
and
release lever
(T)
as
the
needle ap-
proaches
the
edge of
the
materiaL
ill
Fig.
11
11
To Next Page
Loading...
