NEEDLE CFig.7)
CONSEW206RB is set up to use standard style DPxl7. The size of the needle to
be used should be detennined by the size
of
the thread, which must pass freely
through the eye
of
the needle.
HOW
TO
ATTACH
THE
NEEDLE
1
.Turn
the machine pulleyover toward you until the needle
bar0
moves up to its
highest point.
2.Loosen the needle set screw® and put the needle
®up
into the needle bar as
deeply as it will go,with the long groove
of
the needle faces the left.
3.Tighten the needle set screw securely.
Fig. 7
TEREAD
Cotton,synthetic or silk thread can be used according to your purpose.
* Always use left twisted thread for upper (needle) thread, but you can use either
right or left twisted thread for lower (bobbin) thread.
To Next Page
Loading...
