-INDEX-
CONTENTS
Page
Setting up the machine 1
Breaking-in & Direction
of
rotation 1
Oiling 2
Needle
4
Thread
4
Winding the lower thread on the bobbin • • • • 5
Adjustment
of
the bobbin winder 5
Removing and inserting the bobbin 6
Threading the machine 7
Regulating the thread tensions 8
Adjusting the lift
of
the alternating presser feet 9
How to re-set the safety clutch mechanism 9
Extra slotted needle plate 9
INFORMATION
FOR
ADJUSTMENT
Adjusting the height
of
the feed dog 10
Relative position
of
the feeder to needle plate 10
The position
of
the needle and the needle hole
of
the feeder 11
Timing the needle with feed dog 12
Adjusting the height
of
the needle bar 13
Timing between the hook and the needle 14
Adjustment
of
bobbin case opener 14
Adjusting the height
of
the presser feet 15
Timing
of
the vibrating presser foot 16
Adjustment
of
the clearance between feed forked 16
connection
and
feed
fork
collar
Adjusting the thread controller
spring*
17
Adjustment
of
spring tension
of
safety clutch 18
Supplementary information on oiling 19
To Next Page
Loading...
