Need help?Do you have a question about the Consew 199R-1A and is the answer not in the manual?
General| Type | Industrial Sewing Machine |
|---|---|
| Stitch Type | Lockstitch |
| Needle System | DB x 1 |
| Max Stitch Length | 5 mm |
| Stitch Length | Adjustable |
| Speed | Variable |
| Motor | Clutch Motor |
Identifies and describes the primary components of the Consew 199R sewing machine, including spool pin, thread guides, and regulators.
Guidance on choosing and using the correct needles and thread types for the machine, including twist direction.
Step-by-step instructions for safely removing and inserting the bobbin case from the sewing hook assembly.
Detailed guide on how to wind thread onto the bobbin using the bobbin winder.
Instructions for properly threading the bobbin case and inserting it into the hook mechanism.
Procedures for correctly seating the bobbin case within the sewing hook, ensuring proper latching.
Comprehensive guide for threading the upper thread path, including take-up lever and needle.
Final setup steps before starting sewing, including bringing up the bobbin thread.
Explains how thread tension affects stitch quality and identifies common tension issues.
Procedures for adjusting upper and lower thread tension for balanced and perfect stitches.
How to adjust presser foot pressure for different fabric types to ensure even feeding.
How to control stitch length, width, and engage reverse stitching or tacking.
Instructions for setting the machine's zigzag regulating knob for straight or zigzag stitches.
Adjusting the correct vertical position of the needle bar relative to the needle plate.
Aligning the needle correctly within the throat plate slot for straight and zigzag stitches.
Synchronizing the sewing hook with the needle's movement for proper stitch formation.
Procedures for disassembling and reassembling the sewing hook assembly.
Adjusting the feed dog's timing for proper fabric feeding and stitch consistency.
Adjusting the needle bar frame for correct sideways movement during zigzag stitching.
Setting the correct rise of the feed dog relative to the needle plate.
Setting the tension and action of the thread take-up spring for optimal thread delivery.
To Next Page
