Consumer Cellular Wireless Home Phone Base User Manual

27
TROUBLESHOOTING
Problem Possible Solution
NO DIAL TONE Make sure there is AC power to the Wireless Home Phone Base.
Do not connect to an AC outlet controlled by a wall switch.
• Move the device to an area with sufcient network signal
(Green or Yellow Signal Indicator light).
• Make sure your home telephone equipment has power
and is connected properly to the Wireless Home Phone Base.
• Check that the Signal Indicator light is illuminated.
If not, make sure the “On/Off” button on the back
of the device is “On” (press and hold until the
Signal Indicator light illuminates).
NO CALLER ID NAME • Like all wireless services, only the calling number is displayed
with Caller ID.
• Your home phone equipment may support the display
names stored in its contacts memory.

Consumer Cellular Wireless Home Phone Base Specifications

General

Brand	Consumer Cellular
Model	Wireless Home Phone Base
Category	Network Router
Language	English