Contax Aria - Loading the Batteries

nn ="
|
N
A
D0000000000000000(690 D
000000 000000
Film Leader mark/Filmanfangs-Markierung
Hepére d’amorce du film/
Marca de la parte guia de la pelicula
Pull out the film leader as far as the
orange "I" mark and place it on the spool.
Make sure that the film is in contact with the
shutter and does not curl outwards (see
illustrations below).
€ When too much of the film has been pulled out,
rewind excess film back into the cassette.
56
Make sure the camera back is properly
closed.
When the camera back is closed, the film is
automatically advanced into position for the first
shot and the exposure counter will show "01."
When the exposure counter in the display
panel blinks and does not move from *00", the
film is not advancing properly. Open the
camera back and reload the film properly
again.