Need help?Do you have a question about the Contax Aria and is the answer not in the manual?
General| Brand | Contax |
|---|---|
| Model | Aria |
| Category | Digital Camera |
| Language | English |
Instructions for inserting batteries into the camera's compartment.
How to check the camera's battery status on the display panel.
Guidance on when and how to replace the camera's batteries.
Procedures for attaching and removing camera lenses.
Explanation of the camera's main power switch functions.
Details on the information shown in the viewfinder and on the camera's display panel.
Step-by-step guide on how to load film into the camera.
Instructions on setting the film speed, including DX code and manual methods.
How to use the lever to change between different exposure modes.
Explanation of how to select shooting modes like single-frame or continuous.
Guide to adjusting the camera's shutter speed using the dial.
How to choose between different light metering methods.
Instructions on achieving sharp focus using the viewfinder and lens.
Techniques for steady camera handling to ensure sharp images.
Procedures for winding and unloading exposed film.
How shutter speed and aperture values are displayed.
How to use aperture priority mode for controlling depth of field.
How to use shutter speed priority mode for controlling motion blur.
Using programmed auto mode for automatic aperture and shutter speed selection.
How to set both aperture and shutter speed manually for full exposure control.
Using the bulb mode for long exposures, typically for night scenes.
Using the camera with standard X-contact flash units.
Explanation of evaluative, center-weighted, and spot metering methods.
How to adjust exposure for brighter or darker results.
Locking exposure settings for backlit subjects or moving subjects.
Using automatic bracketing control for three consecutive exposures.
Using slow shutter speeds with flash for night or twilight scenes.
Using flash in bright daylight for balanced subject and background exposure.
Flash firing at the end of exposure for motion blur effects.
Using non-dedicated flash units with the camera's sync terminal.
Explanation of the camera's five customizable operational settings.
Step-by-step guide on how to configure custom function settings.
Description of the socket for connecting remote cable releases.
Instructions on how to remove the camera's back panel.
How to use the button to check depth of field by stopping down the aperture.
Fundamental concept of how light affects film exposure.
How shutter speed controls the amount of light reaching the film.
How aperture size controls the amount of light passing through the lens.
Understanding film sensitivity and its impact on image quality.
The range of sharpness in front of and behind the focus point.
Details about the clip-on TTL direct metering auto-flash unit.
Information on the data back for imprinting exposure or date data.
Connecting an external power supply for extended camera operation.
Information on interchangeable focusing screens for various shooting needs.
Eyepiece diopter lenses for users with vision impairments.
A protective camera case designed to accommodate specific camera and lens combinations.
To Next Page
