Contax Aria - Shutter Speed Dial

3 Press the shutter release a second time.
After the second exposure, the film is advanced
and the multiple exposure is completed.
166
@ When the multiple exposure has been made,
the camera is reset to “S” drive mode.
@ Even if the main switch is turned off after the
first exposure, the camera is ready for the
second exposure when the main switch is
turned on again.
@ The multiple exposure mode is canceled if the
camera is set to some other drive mode before
exposure.
e Note that the multiple exposure mode cannot
be canceled when the first exposure has been
made.
e The multiple exposure mode is canceled if the
main switch is turned off when the “sh” mark
on the display panel blinks. The next time the
main switch is turned on, the camera goes on
in drive mode “S.”