Contax Aria - Exposure Mode Selector Lever

146
When taking pictures indoors or at night where
shutter speed of slower than 1/30 sec. is
required, use a flash. In combination with the
Contax TLA Flash System, this camera is
designed to provide “TTL direct light metering” in
which the amount of flash light can be
automatically controlled on the camera side.
When using the TLA360 Flash Unit, be sure to
read the section, “CONTAX TLA360 Flash Unit”
on page 202.
When using standard X-contact flash unit, set the
exposure mode selector lever to “X.”
<Taking Pictures on TTL Direct Light
Metering>
Mount the TLA flash unit on the camera
and turn it on.
Set the flash unit to “TTL AUTO.”
As soon as the flash is fully charged, the
mark “ * " will appear in the viewfinder and the
shutter speed will automatically be set depending
on the exposure mode.
= Aperture-priority auto exposure mode (Av)
ma oo
46 to 1/ “60” lights
1/60 to 1/125 sec. 1/60 to 1/125 sec. “60” lights---
E = “125” lights
1/125 to 1/4000 sec. 1/125 sec. “125” lights
ii Shutter-speed-priority auto exposure mode (Tv)
Shutter dial. Automatically set D
‚setting .hutterspeed
`Å to 1/125 sec. 4 to 1/125 sec. (shutter speed
: (0055 which is set on dial)
1/250 to 1/4000 sec. 1/125 sec.
“125” lights
& Programmed auto exposure mode (P)
. Measured val
60” lights
1/60 to 1/125 sec. “60” lights---
“125” lights
00 sec. 1/125 sec. “125” lights