Contax Aria - Setting the Film Speed

If there is a great difference in brightness
between the subject and its background, the
subject will not be correctly exposed. In this
case, Use exposure compensation. Exposure
Exposure Compensation Dial
Belichtungskorrektur-Index
Barillet de correction d'exposition
Aro de compensación de la exposición
compensation can also be used for intentional
over-and
underexposure.
There
are
three
Ag!
methods:
>
|}
La
Y
Normally, the exposure compensation dial is set
to “0” in the aperture-priority (Av), shutter-speed-
priority (Tv) or programmed auto exposure (P) =:
and manual exposure (M) modes. To compensate
exposure, turn and set the dial so that your
desired compensating value comes opposite the
index mark. It can be set in 1/3-EV increments
within a range of +2 EV to -2 EV. When the
<1.
Using
the
Exposure
Compensation
|
dE)
Dial>
|
y
Exposure Compensation Index
Belichtungskorrekturring
Index de correction d'exposition
indice de compensación de la
exposure
compensation
dial
is
set
anywhere
exposición
Blinks
except
“0”,
the
“+”
or
“-”
mark
will
blink
in
the
Blinkt
viewfinder,
indicating
that
the
exposure
Clignote
compensation
is
in
effect.
Parpadea
126