Contax G2 - Page 104

236
@ The angle of view can be set to 28 mm, 35
mm, 50 mm, 60 mm or 85 mm.
e For a lens with its focal length other than the
above, adjust the angle of view for the closest
focal length.
To dismount the lens from the mount adapter,
rotate it anticlockwise while pressing the lens
mounting button of the mount adapter.
To dismount the mount adapter from the
camera, rotate it anticlockwise while pressing
the lens mounting button of the camera.
m How to Use:
Measure the shooting distance, and adjust
the angle of view ring for the distance.
[If the metering function of the camera is
available:]
Set the camera's focus mode to “SAF”. Depress
the shutter release halfway to turn the shooting
distance on in the display panel. Rotate the
distance ring of the lens to set the measured
distance manually.
[If the metering function of the camera is
unavailable:]
Determine the shooting distance by eye
measurement or a measuring tool. Rotate the
distance ring of the lens to set the measured
distance manually.
* The operating method varies with a focal
length and external diameter of a lens. For
details, see pages 240-241.
Use the viewfinder to focus and compose.
Set the aperture to shoot.
Use the aperture smaller than F4 to ensure
that the lens is precisely focused by means of
the depth of field.
e It is possible to take pictures in the aperture-
priority auto exposure mode as the metering
system is switched to the “TTL actual
exposure metering.”
e You can ignore the lens-barrel that might
appear on the viewfinder because it does not
come out on the picture.