Contax G2 - Page 21

42
<Display Panel>
(The illustration shows all information available in the
display panel/exposure counter for reference. It does not
represent an actual example of display.)
DA a A
BAIM]
—— a Ca. o
@ISO/DX Indicator
When displaying the film speed or in the film
speed setting mode, this indicator will be
displayed.
@ When auto mode is set with DX code, always
“DX” is displayed.
@Multiple Exposure Mark
e—1SO DX o
$ Shooting Distance/Film Speed Indicator
When the shutter release is depressed halfway,
the shooting distance is displayed. Ifthe ISO
button is depressed, however, it switches to
display the film speed.
It also shows the setting condition for custom
functions.
€ Battery Warning Mark
It turns on when it is time to change the batteries.
<Exposure Counter>
The exposure counter normally shows the
number of exposures on a film. It also provides
the following functions:
+ Display of the operation order in the “A.B.C.”
mode
e Display of the end of the film.
e Remaining operating time in self-timer mode.
e Elapsed time during bulb exposure (B) mode.