Contax G2 - Page 67

The use of a flash is recommended when taking
pictures indoors, at night, or otherwise in dim
locations. By combining this camera with a
dedicated Contax TLA flash system, flash
photography can be performed using “TTL direct
metering,” in which the flash unit's light output is
controlled directly by the camera.
<Taking Pictures on TTL Direct Light
Metering>
1 Mount the TLA flash unit on the camera.
Set the flash unit to “TTL AUTO”.
As soon as the flash is fully charged, the
mark “ $” will turn on in the viewfinder and the
shutter speed will automatically set as follows:
Gy’ 3 21510705
D
146
E Aperture-priority Auto Exposure Mode:
Ig H
16~1/60 sec. 1/60 sec. “60” lights
1/60~1/200 sec. 1/60~1/200sec. “60” to
“200” lights
Over 1/200~ 1/200 sec. “200” lights,
1/6000 sec. “a” blinks*
* Overexposure may occur. In this case, adjust the
aperture ring so that the “a” mark disappears, and
shoot.