Contax G2 - Page 73

162
<Taking Pictures with Flash Units Other
than the TLA Flash Unit>
Mount the flash unit on the camera. Set
the shutter speed dial to “X”.
This camera’s shutter speed is set to “X” (1/200
sec.) or 1/125 sec. or slower.
Syne terminal
Blitzkabelbuchse
Prise.de synchronisation
Terminal de sincronización
Set the aperture and shoot.
Set the aperture ring according to the
instructions for the flash unit you use.
e If you use a cord type that has no direct
contact, connect the cord to the sync terminal
on the side of the camera.