Contax G2 - Page 75

3 Set the drive mode dial to “S”.
The “a” mark will remain lit in the panel display.
@ Note that further exposures will not be possible
if the drive mode dial is left set to “mm”.
166
After the second exposure
(End of the multiple exposure)
nach der zweiten: Belichtung
(Ende der Mehrfachbelichtung)
Apres la deuxieme exposition
(Fin de l'exposition multiple) `
Después de la segunda exposición
(Fin de la exposición multiple)
Press the shutter release button once
again. After the second exposure, the film
will be automatically advanced and the muitiple
exposure mode will be canceled.
If you want to make three or more exposures on
a single frame, first set the drive mode dial to “S”
in step 3 above, then set the dial to “mi” again.
The “sh” mark will turn on, then blink. If you
press the shutter release again in this condition,
you will be able to make an additional exposure.
By repeating this procedure, you will be able to
make the number of exposures you want.