Contax T3 - Page 37

^ Depress the shutter
^ release button halfway
and confirm that the focus
indicator is lighted, then
press the shutter fully to
activate the selftimer.
C The selftimer starts
and 10 (or 2) sec later
the shutter trips.
The selftimer function is
automatically canceled after a
photograph is taken.
• To cancel the selftimer function after it has started, either press the mode
button or turn the camera OFF.
• During operation of the selftimer, the exposure counter shows the
remaining time in seconds before the shutter trips. The selftimer LED
blinks in the viewfinder.
• Exposure and focus are locked when the selftimer starts.
• If the shutter release button is pressed again after the selftimer has
started, the exposure counter is reset and the selftimer starts again.
• To cancel the selftimer set the mode button to “No Display”.
• The selftimer operation cannot be started while the flash is charging.
41