Contax T3 - Page 39

• The long-time mode does not provide automatic exposure control.
• Use the aperture dial to set the desired aperture for the exposure. Setting
the dial to “P” will result in a wide-open (F2.8) aperture.
• To cancel the long-time mode after setting but before you have operated
the shutter, follow steps 2-3 to set shutter time to
• 8 sec after setting the shutter speed, the display will return to its normal
appearance, with the addition of the “LT” indicator.
• Always use a tripod in this mode to prevent camera shake.
• Using the long-time mode together with the selftimer function will help
prevent camera shake caused by pressing the shutter release button.