Contax T3 - Page 45

<Setting Custom Functions>
Custom Function Setting Mode
1 With camera turned
OFF, hold both the
flash mode button and
mode button depressed
simultaneously until the
“CF” indicator appears in
the display (about 3 sec or
more).
O Rotate the mode dial
^ to select the function
number.
O Press the mode dial to
select the function
contents.
/I Press the shutter
button to set the
custom function; the
display will return to its
normal appearance.
• The custom function can also be set by default by waiting for 8 seconds,
or by setting the main switch to “P” while the indicator is blinking.
• To reset the custom functions to default values (CL command) you
must set the main switch to “P” to confirm the reset operation.
49