Need help?Do you have a question about the CONTINENTAL AIRCRAFT ENGINE A-65 and is the answer not in the manual?
Defines the manual's scope and purpose for spark ignition AvGas aircraft engines.
Details supplemental instructions for continued airworthiness (ICA) for applicable engines.
Explains the three types of advisories (WARNING, CAUTION, NOTE) used in the manual.
Defines symbols used to indicate engine model specific information.
Provides guidance on how to effectively use the manual and its components.
Lists service documents integrated into this manual and their applicability.
Details the procedure for performing a magneto RPM drop check on the engine.
Outlines the procedure for safely shutting down the engine after testing.
Provides instructions for performing an engine oil change and collecting oil samples.
Describes proper procedures for operating engines after cylinder work or overhaul.
Details the process for installing cylinders, including component preparation and assembly.
Specifies torque values and sequences for cylinder installation hardware.
Provides instructions for installing the solid crankshaft nose oil seal.
Outlines the procedure for removing split type crankshaft nose oil seals.
Details the process for installing split type crankshaft nose oil seals.
Lists parts that must be replaced during engine overhaul.
Explains the application procedure for Gasket Maker sealant.
Provides general guidelines for gasket installation and torque.
Details the proper use and installation of crush washers.
General| Type | 4-cylinder, horizontally opposed, air-cooled |
|---|---|
| Compression Ratio | 6.3:1 |
| Cooling System | Air-cooled |
| Displacement | 171 cu in (2.8 L) |
| Bore | 3.875 inches (98.4 mm) |
| Stroke | 3.625 in (92.1 mm) |
| Power Output | 65 hp (48 kW) |
| Weight | 170 lb (77 kg) |
| Fuel System | Carburetor |
| Fuel Type | 80/87 avgas |
To Next Page