CONTINENTAL AIRCRAFT ENGINE IO-240

Need help?

Do you have a question about the CONTINENTAL AIRCRAFT ENGINE IO-240 and is the answer not in the manual?

Summary

Chapter 1. Introduction

1-1. Scope and Purpose of This Manual

1-1.2. Advisories

Defines advisory types (WARNING, CAUTION, NOTE) used in the manual for safety and clarity.

Engine Inspection and Service

Table 6-4. Fuel System Adjustment Values

Provides idle and full power fuel pressures and flow adjustment values for various engine models.

6-4.7.5. Magneto RPM Drop Check

Details the procedure and safety precautions for performing a magneto RPM drop check on the engine.

6-4.7.6. Engine Shutdown

6-4.8.2. Oil Change

Provides step-by-step instructions for performing an engine oil change, including oil sampling.

Engine Operation

Table 7-2. Authorized Fuels by Engine Model

7-2.3. Engine Operation after Cylinder Replacement and;or Major Overhaul

Provides procedures for proper engine operation following cylinder replacement or major overhaul for component seating.

Non-Overhaul Repair and Replacement

10-6.1.2. Cylinder Installation

Details the process and criteria for installing new or repaired cylinders onto the engine.

10-6.1.3. Cylinder Torque

10-10.2. Solid Nose Oil Seal Installation

10-10.3. Split Nose Oil Seal Removal

10-10.4. Split Type Nose Oil Seal Installation

Torque Specifications

Table B-2. Component Specific Torque Specifications

Lists torque values for various fasteners and components used in engine assembly and maintenance.