Need help?Do you have a question about the CONTINENTAL AIRCRAFT ENGINE IO-346 and is the answer not in the manual?
Outlines the manual's purpose, scope, and applicable engine models.
Details supplemental ICA requirements and lists relevant service documents.
Explains the use of WARNING, CAUTION, and NOTE advisories for safety and clarity.
Defines symbols indicating variations in engine configurations and applicability.
Provides guidance on interpreting and utilizing the manual's content effectively.
Lists service documents integrated into this manual and their purpose.
Procedure for checking engine RPM drop during magneto operation.
Steps for safely shutting down the engine after testing or operation.
Instructions for performing engine oil changes and inspecting oil for wear.
Detailed steps for installing engine cylinders, including preparation and assembly.
Specifies torque values and sequences for cylinder fastening hardware.
Procedure for installing the solid nose oil seal on the crankshaft.
Steps for removing the split type nose oil seal.
Procedure for installing the split type nose oil seal on the crankshaft.
Lists components that require mandatory replacement during engine overhaul.
Guidelines for applying Gasket Maker sealant to engine parts.
Procedures for proper gasket installation and assembly torquing.
Instructions for the proper installation and torquing of crush washers.
General| Configuration | Horizontally opposed |
|---|---|
| Compression ratio | 8.5:1 |
| Fuel Type | Avgas 100LL |
| Fuel system | Fuel injection |
| Cooling system | Air-cooled |
| Max RPM | 2800 RPM |
| Displacement | 346 cubic inches |
| Type | Four-stroke |
| Ignition | Dual Magneto |
To Next Page