1-12 Standard Practice Maintenance Manual
CHANGE 2 30 Sep 2016
Introduction
* Documents remain active in the service bulletin set.
SB96-12, Cylinder Continued Airworthiness Scheduled Inspection 6 & 10
SID97-2B, Design, Operation Maintenance and
Warranty of Cylinders
Engine Maintenance 6
SID97-3G, Continuous Flow Fuel Injection Systems
Adjustment Specifications and Instructions
Operational Checks and
Adjustments
6
SID97-4F, Cylinder Bore and Piston Fit Specifications Overhaul & Service Limits 10
SB97-6B, Mandatory Replacement Parts Engine Inspection & Assembly Appendix C
SIL98-9E, Time Between Overhaul Periods Scheduled Maintenance 6
SIL99-1, Engine Preservation for Active and Stored
Aircraft
Engine Preservation and Recovery 9
SIL99-2C, Sealants, Lubricants and Adhesives
Authorized by CMI
Materials 3
SB00-3A, Crankshaft, Counterweight and Connecting
Rod Repair Information
Repair Specifications 10
SIL00-9A, Engine Data Plates Data Plate Replacement Appendix C
SIL00-11B, Release of new Cylinder Induction Port
Drain Connector
Cylinder Assembly 10
SIL03-1, Cold Weather Operation - Engine Preheating Engine Operation 7
SIL03-2C, Currently Active Approved Spark Plug
Application
Spark Plugs 6
SB03-3, Differential Pressure Test and Borescope
Inspection
Inspection Criteria 6
SIL04-12A, Authorized Engine Adjustments,
Component Replacement and Repositioning
Engine Specification 5
SB05-2, Overspeed Limitations Unscheduled Maintenance 6
* CSB08-3C, Throttle & Mixture Control Levers Fuel Injection System Assembly 6
SB08-13, Induction System Hose and Clamp
Installation
Induction System Inspection &
Assembly
6
SB11-3, Alternator and Drive Coupling Installation Alternator Replacement 6, 10
SIL13-2A, Alternator Instructions for Continued
Airworthiness
Alternator Replacement 6, 10
SB14-8, Exhaust Flange to Cylinder Installation Exhaust System Installation 10
Table 1-1. Service Documents Incorporated in Manual
Service Document Subject Affected Chapter
To Next Page
Loading...
Need help?
General
