Why is my CONTINENTAL EDISON Hob fan still running after I turn it off?
This is normal. A cooling fan inside your CONTINENTAL EDISON induction Hob operates to prevent overheating of the electronics and may continue running after the hob is turned off. Avoid switching off the power to the induction hob while the fan is still running.
Why does my CONTINENTAL EDISON CETI4ZFLEXB1 make a humming noise on high heat?
This humming noise is a normal occurrence due to the induction cooking technology. The sound should decrease or disappear when you lower the heat setting on your CONTINENTAL EDISON Hob.
How to fix a CONTINENTAL EDISON CETI4ZFLEXB1 that won't turn on?
Ensure that your CONTINENTAL EDISON Hob is properly connected to the power supply and switched on. Check for any power outages in your home or area. If the problem persists after these checks, contact a qualified technician.
What to do if my CONTINENTAL EDISON Hob says no pot?
If the display shows that pans do not become hot, this means that the induction hob cannot detect the pan because it is not suitable for induction cooking or because the pan is too small for the cooking zone or not properly centered. Use cookware suitable for induction cooking. Center the pan and make sure that its base matches the size of the cooking zone.
Why is my CONTINENTAL EDISON Hob making crackling noises?
This crackling or clicking noise may be normal and is caused by the construction of your cookware, where different metal layers vibrate differently. This does not indicate a fault in your CONTINENTAL EDISON Hob.
Why are the touch controls on my CONTINENTAL EDISON Hob difficult to operate?
Ensure the touch control area of your CONTINENTAL EDISON Hob is dry. Use the ball of your finger, not the tip, when touching the controls.
What to do if touch controls are unresponsive on CONTINENTAL EDISON Hob?
To address unresponsive touch controls on your CONTINENTAL EDISON Hob, unlock the controls. Refer to the ‘Using the hob’ section for instructions on how to do this.
How to prevent scratches on my CONTINENTAL EDISON CETI4ZFLEXB1 Hob glass?
To prevent scratching the glass of your CONTINENTAL EDISON Hob, use cookware with flat and smooth bases. Also, avoid using abrasive scourers or cleaning products. See ‘Choosing the right cookware’ and ‘Maintenance and cleaning’ sections for more details.
What does E6/E9 mean on CONTINENTAL EDISON CETI4ZFLEXB1?
Please restart your CONTINENTAL EDISON induction hob after it cools down. This issue is usually related to bad heat radiation.
What does E2/E3 mean on CONTINENTAL EDISON CETI4ZFLEXB1 Hob?
Please inspect whether the power supply is normal. Power on your CONTINENTAL EDISON hob after the power supply is normal.
General| Brand | CONTINENTAL EDISON |
|---|---|
| Model | CETI4ZFLEXB1 |
| Category | Hob |
| Language | English |
To Next Page
