The induction hob or
a cooking zone has
turned itself off
unexpectedly, a tone
sounds or an error
code is displayed.
Please not down the error letters and
numbers, switch the power to the
induction hob off at the wall, and
contact a qualified technician.
Failure Display and Inspection
If an abnormality comes up, the induction hob will enter the protective state automatically
and display corresponding protective codes:
No pot or pot not suitable
Please inspect whether power supply is normal.
Power on after the power supply is normal.
Temperature sensor of
the IGBT failure
Please contact the supplier.
Temperature sensor
failure
Please contact the supplier.
Bad induction hob heat
radiation
Please restart after the induction hob cools down.
PCBA communication
failure
Please contact the supplier.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to
the induction hob.
To Next Page
