Contixo F16 - Page 27

Technical Support
Trouble Shoong
Drone does not respond
to user controls.
The blades spin, but the
drone cannot take off.
The
drone shakes
heavily.
Drone does not stabilize
during flight with fine tuning.
1. The blades distorted.
2. Defecve motor.
The blades distorted. Replace the blades.
1. Replace the blades.
2. Replace the motor.
1. Remote is not synced to
the drone.
2. Insufficient baery power.
1. Refer to page 11-14 (Flight).
2. Recharge the baery.
1. Recharge the baery.
2. Replace the blades.
Problem Cause Soluon
Website: www.contixo.com
- 25 -
1. Insufficient baery power.
2. The blades distorted.
3. The blades Side A and Side
B are reversed.
E-mail: support@conxo.com
Mon-Fri 9:00 am - 4:00 pm PST
Have quesons?
Drone cannot takeoff aer
accident.
Four-axis acceleraon sensor
loses balance.
Recalibrate compass.